Adaptador USB - Serial
Cable de consola CISCO
Comenzamos por conectar el adaptador usb a serial en una computadora personal que cuente con HyperTerminal ó una aplicación similar. Una vez conectado y configurado el adaptador, debemos de observar en que puerto COM esta trabajando.
En Windows XP HyperTerminal se encuentra en la siguiente ruta:
Inicio -> Todos los programas -> Accesorios -> Comunicaciones -> HyperTerminal
Conectamos el cable de consola a el adaptador y desupés el mismo a el equipo. abrimos la aplicación y escribimos un nombre para nuestra conexión y elegimos un icono y presionamos Aceptar.
En la siguiente ventana en la opción Conectar usando, elegimos el puerto COM en donde se encuentra conectado el adaptador USB - Serial y continuamos.
En la siguiente ventana elegimos Restaurar los valores predeterminados y damos click en Aceptar.
En la página en blanco aparecere un prompt preguntandonos el password de administrador del equipo. Una vez ingresado correctamente el password, aparecerá la pantalla de bienvenida de la consola de administración del equipo.
Catalyst 1900 Management Console
Copyright (c) Cisco Systems, Inc. 1993-1999
All rights reserved.
Standard Edition Software
Ethernet Address: 00-D0-06-91-F1-00
PCA Number: 73-3122-03
PCA Serial Number: FAB03183DAV
Model Number: WS-C1912-A
System Serial Number: FAB0321V0TA
Power Supply S/N: PHI031402JZ
PCB Serial Number: FAB03183DAV,73-3122-03
-------------------------------------------------
1 user(s) now active on Management Console.
User Interface Menu
[M] Menus
[I] IP Configuration
[P] Console Password
Enter Selection:
A través del prompt podemos navegar por el sistema de el equipo. A continuación algunos ejemplos de configuraciones que podemos realizar por medio de la consola de administración.
Catalyst 1900 - Main Menu
[C] Console Settings
[S] System
[N] Network Management
[P] Port Configuration
[A] Port Addressing
[D] Port Statistics Detail
[M] Monitoring
[B] Bridge Group
[R] Multicast Registration
[F] Firmware
[I] RS-232 Interface
[U] Usage Summaries
[H] Help
[X] Exit Management Console
Enter Selection:
Catalyst 1900 - Network Management
[I] IP Configuration
[S] SNMP Management
[B] Bridge - Spanning Tree
[C] Cisco Discovery Protocol
[G] Cisco Group Management Protocol
[H] HTTP Server Configuration
[R] Cluster Management
[X] Exit to Main Menu
Catalyst 1900 - IP Configuration
Ethernet Address: 00-D0-06-91-F1-00
----------------------- Settings ---------------------------------------
[I] IP address 148.202.8.12
[S] Subnet mask 255.255.255.0
[G] Default gateway 148.202.8.254
[B] Management bridge group 1 (always)
[M] IP address of DNS server 1 148.202.12.1
[N] IP address of DNS server 2 0.0.0.0
[D] Domain name
[R] Use Routing Information Protocol Enabled
----------------------- Actions ----------------------------------------
[P] Ping
[C] Clear cached DNS entries
[X] Exit to previous menu
Catalyst 1900 - Firmware Configuration
----------------------- System Information -----------------------------
FLASH: 1024K bytes
V9.00.07 : Standard Edition
Upgrade status:
No upgrade currently in progress.
----------------------- Settings ---------------------------------------
[S] TFTP Server name or IP address
[F] Filename for firmware upgrades
[A] Accept upgrade transfer from other hosts Disabled
----------------------- Actions ----------------------------------------
[U] System XMODEM upgrade [D] Download test subsystem (XMODEM)
[T] System TFTP upgrade [X] Exit to Main Menu
Catalyst 1900 - Port 1 Addressing
Address : Unaddressed
----------------------- Settings ---------------------------------------
[T] Address table size Unrestricted
[S] Addressing security Disabled
[K] Clear addresses on link down Disabled
[U] Flood unknown unicasts Enabled
[M] Flood unregistered multicasts Enabled
----------------------- Actions ----------------------------------------
[A] Add a static address
[D] Define restricted static address
[L] List addresses
[E] Erase an address
[R] Remove all addresses
[C] Configure port [V] View port statistics
[N] Next port [G] Goto port
[P] Previous port [X] Exit to Main Menu
Enter Selection:
Catalyst 1900 - System Configuration
System Revision: 5 Address Capacity: 1024
System UpTime: 0day(s) 00hour(s) 43minute(s) 15second(s)
----------------------- Settings ---------------------------------------
[N] Name of system
[C] Contact name
[L] Location
[S] Switching mode FragmentFree
[U] Use of store-and-forward for multicast Disabled
[A] Action upon address violation Suspend
[G] Generate alert on address violation Enabled
[I] Address aging time 300 second(s)
[P] Network port None
[H] Half duplex back pressure (10-mbps ports) Disabled
[E] Enhanced congestion control (10-mbps ports) Disabled
----------------------- Actions ----------------------------------------
[R] Reset system [F] Reset to factory defaults
----------------------- Related Menus ----------------------------------
[B] Broadcast storm control [X] Exit to Main Menu
[N] Name of system
This command assigns an administrative name for this system.
By convention, this is the system's fully-qualified domain name.
Enter a name using a maximum of 255 characters:
Current setting ===>
New setting ===> switch01
[S] Switching mode
Catalyst 1900 - System Configuration
System Revision: 5 Address Capacity: 1024
System UpTime: 0day(s) 00hour(s) 48minute(s) 46second(s)
----------------------- Settings ---------------------------------------
[N] Name of system switch01
[C] Contact name
[L] Location
[S] Switching mode FragmentFree
[U] Use of store-and-forward for multicast Disabled
[A] Action upon address violation Suspend
[G] Generate alert on address violation Enabled
[G] Generate alert on address violation Enabled
[P] Network port None
[H] Half duplex back pressure (10-mbps ports) Disabled
[E] Enhanced congestion control (10-mbps ports) Disabled
----------------------- Actions ----------------------------------------
[R] Reset system [F] Reset to factory defaults
----------------------- Related Menus ----------------------------------
[B] Broadcast storm control [X] Exit to Main Menu
Enter Selection: S
FragmentFree switching mode reduces bridge delay by making the
forwarding decision after 64 bytes have been received.
In contrast, Store-and-Forward switching mode
waits until the entire frame has been received before the forwarding
decision is made. This command sets the switching mode.
Select Store-and-Forward[1], or FragmentFree[2]:
Current setting ===> FragmentFree
Catalyst 1900 - Monitoring Configuration
----------------------- Settings ---------------------------------------
[C] Capturing frames to the Monitor Disabled
[M] Monitor port assignment None
Current capture list: No ports in list
----------------------- Actions ----------------------------------------
[A] Add ports to capture list
[D] Delete ports from capture list
[D] Description/name of port
Catalyst 1900 - Port 1 Configuration
Built-in 10Base-T
802.1d STP State: Forwarding Forward Transitions: 1
----------------------- Settings ---------------------------------------
[D] Description/name of port
[S] Status of port Suspended-no-linkbeat
[F] Full duplex Disabled
[I] Port priority (spanning tree) 128 (80 hex)
[C] Path cost (spanning tree) 100
[H] Port fast mode (spanning tree) Enabled
----------------------- Related Menus ----------------------------------
[A] Port addressing [V] View port statistics
[N] Next port [G] Goto port
[P] Previous port [X] Exit to Main Menu
Enter Selection: D
A string of up to 60 characters may be specified to name or describe
a port. For example, port 3 may be given a name such as
'Software Engineering segment'.
Enter port description/name (60 characters max):
Current setting ===>
New setting ===>
